V Users

Custom ear plugs protect hearing Hearing protection, explains Plant Manager Peter Kuijs, is one of the main health challenges at this AES Jordan site. Personnel (especially O&M teams) are exposed to high noise areas daily. The hearing-protection devices used were disposable ear plugs or ear muffs. Their main deficiencies: Discomfort, incorrect use, infection, and lifecycle […]

There were six V94.2 user presentations at the 2019 meeting, half based on experience in Europe, half in the Middle East. Speakers focused on the following: results of an extended HGP, follow-up on repairs to a compressor’s axial bearing after two years of operation, outage findings, damage to turbine blades attributed to domestic object damage,

There were eight V94.3A user presentations at last year’s meeting, half based on experience in Europe, half in Asia. The European speakers focused on the following: gas-turbine O&M history covering nearly 10 years, generator major, expansion-joint failure analysis and repair/replacement, and combustion tuning to allow an increase in fuel temperature. Presenters from Dubai Electricity &

GTUsers.com, a web portal designed and maintained by Gasre Oy (www.gasre.com) to facilitate communication among owner/operators of gas turbines, transitioned from a “hobby” to a professional service in 2014. Coincidentally, the independent Finnish firm, launched in that year the development of its TMMonitor™ product for gas-turbine maintenance management and parts tracking. This software is represented

The first gas-turbine user group known to the editors got its start in the US in the mid-1970s. It provided valuable experience on the operation and maintenance of these relatively new prime movers, which were ordered by electric utilities in large numbers following the Northeast Blackout of 1965. Back then the dominant engines for power

ARNOLD Group is well known worldwide for its gas- and steam-turbine insulation solutions; in Europe and Asia also for its powerplant rotating-equipment and valve field-services capabilities. The company’s history in gas-turbine insulation, the focus of this report, goes back nearly a quarter of a century to the installation of the first Arnold 3D single-layer system

Comprehensive training transforms coal-plant personnel into multi-skilled CC operators Powerplant technical training has evolved from learning on the job to VHS tapes to DVDs to eLearning with hands-on laboratory modules. As the power-generation business strategy changed to include the Riverton Power Station’s conversion from coal to combined cycle, steps were put in place to re-tool

Sulzer’s Rotating Equipment Services unit—formerly Sulzer Turbo Services—offers a wide range of inspection, shop, repair, and manufacturing services for gas and steam turbines, generators, pumps, compressors, and other power and process equipment. The company actively supports the V94/84.2 and V94/84.3A fleets through its participation in user meetings here and internationally. It has major shop facilities

Eta Technologies LLC, believed by many to be the nation’s leading independent provider of new and aftermarket parts and maintenance solutions for Siemens V series industrial gas turbines, was purchased by Allied Power Group (APG) in mid-2018. Principals Rich Curtis and John Kearney, who launched Eta Tech in 2004 and were well known to V

Perhaps the best way to begin this section on experiences shared by V84.2/V84.3A owner/operators during the annual conference of V users at the Pittsburgh Marriott City Center, September 2019, is to share the following passage from an announcement on the meeting from Scott Wright of PowerSouth Energy Co-op: “Many of you know Olaf Barth, who